| Last Modified: 11-29-2007 | 1.6 U | |
| Service Category: Vehicle Interior | Section: Theft Deterrent/Keyless Entry | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001PQY00YX |
| Title: THEFT DETERRENT / KEYLESS ENTRY: THEFT DETERRENT SYSTEM: DATA LIST / ACTIVE TEST (2008 Sequoia) | ||
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using a Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus:
Select: Body Electrical / Main Body or Back Door ECU / Data List /
(e) According to the display on the Techstream, read the Data List.
Main Body (Main Body ECU)
|
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
Key Unlock Warning SW |
Unlock warning switch signal / ON or OFF |
ON: Key is inserted in the ignition key cylinder OFF: Key is removed from the ignition key cylinder |
- |
|
ACC SW |
Ignition switch ACC signal / ON or OFF |
ON: Ignition switch is ACC OFF: Ignition switch is off |
- |
|
IG SW |
Ignition switch signal / ON or OFF |
ON: Ignition switch is ON OFF: Ignition switch is off |
- |
|
D Door Courtesy SW |
D door courtesy switch / ON or OFF |
ON: Driver side door is OPEN OFF: Driver side door is CLOSED |
- |
|
P Door Courtesy SW |
P door courtesy switch / ON or OFF |
ON: Front passenger side door is OPEN OFF: Front passenger side door is CLOSED |
- |
|
RR Door Courtesy SW |
Rear right door courtesy switch / ON or OFF |
ON: Rear right door is OPEN OFF: Rear right door is CLOSED |
- |
|
RL Door Courtesy SW |
Rear left door courtesy switch / ON or OFF |
ON: Rear left door is OPEN OFF: Rear left door is CLOSED |
- |
|
D-Door Lock Pos SW |
Driver's door lock position switch / ON or OFF |
ON: Driver's door is UNLOCKED OFF: Driver's door is LOCKED |
- |
|
P-Door Lock Pos SW |
Passenger door lock position switch / ON or OFF |
ON: Passenger door is UNLOCKED OFF: Passenger door is LOCKED |
- |
|
RR-Door Lock Pos SW |
Rear right door lock position switch / ON or OFF |
ON: Rear right door is UNLOCKED OFF: Rear right door is LOCKED |
- |
|
RL-Door Lock Pos SW |
Rear left door lock position switch / ON or OFF |
ON: Rear left door is UNLOCKED OFF: Rear left door is LOCKED |
- |
|
Hood Courtesy Switch |
Engine hood courtesy signal / ON or OFF |
ON: Engine hood is OPEN OFF: Engine hood is CLOSED |
- |
|
Glass Break Sensor Detection* |
Glass breakage sensor detection / ON or OFF |
ON: Glass breakage sensor is ON OFF: Glass breakage sensor is off |
- |
|
Passive Mode |
Passive mode / ON or OFF |
ON: Passive mode is ON OFF: Passive mode is off |
- |
|
Warning by Horn |
Warning by horn / ON or OFF |
ON: Vehicle horns sound during alarm sounding state OFF: Vehicle horns do no sound during alarm sounding state |
- |
|
Glass Breakage Sensor* |
Glass breakage sensor / ON or OFF |
ON: Glass breakage sensor is ON OFF: Glass breakage sensor is off |
- |
|
Entry Delay |
Entry delay time during passive mode |
0 s: Entry delay time is 0 sec. 14 s: Entry delay time is 14 sec. 30 s: Entry delay time is 30 sec. |
- |
HINT:
*: w/ Glass Breakage Sensor
Back Door ECU
|
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
Back Door Courtesy SW |
Back door courtesy switch / ON or OFF |
ON: Back door is OPEN OFF: Back door is CLOSED |
- |
2. ACTIVE TEST
HINT:
Using a Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus:
Select: Body Electrical / Main Body / Active Test /
(e) According to the display on the Techstream, perform the Active Test.
Main Body
|
Tester Display |
Test Part |
Control Range |
Diagnostic Note |
|---|---|---|---|
|
Hazard |
Hazard warning lights |
ON/OFF |
- |
|
Vehicle Horn |
Vehicle horns |
ON/OFF |
- |
|
Security Indicator |
Security indicator |
ON/OFF |
- |
|
Security Horn |
Security horn |
ON/OFF |
- |
|
|